21LC650 Flat-Top Crane

  • Reach: 262.5 ft
  • Jib-end load: 9,920 lb or 9,040 lb depending on the version + 10% with PowerLift
  • Maximum load: 44,900 lb, 55,120 lb or 82,670 lb, depending on the version

The 21LC650 flat-top tower crane offers two options: 44,900 lb, 55,120 lb and 82,670 lb maximum load, which can be assembled with ranges of between 98.4 and 262.5 ft with configurations every 5 metres, allowing a maximum point load of up to 10,910 lb.

The 21LC650 flat-top crane incorporates an optional boom configuration that allows the total range to be extended to 278.9 ft at the tip. Compared with the 21LC550 model, load capacities are on average 23% higher.

One of the main features in the 21LC650 flat-top tower crane is that it has a shorter, modular counter-jib, ranging from 80 to 53.8 ft and having up to 5 possible configurations. This concept has a precedent in models 21LC750 / 21LC1050 / 21LC1400 and offers greater adaptation to the work configuration in reduced spaces.

Another strength of the 21LC650 crane is the improved access to the turntable and the rotating part: the cathead has been redesigned to facilitate the passage of lifting cables, including a welded ladder that allows access to the highest part without the need for the cab platform. Access to the cab platform is now direct via the turntable thanks to the folding ladder, preventing falls while working on the upper level and also being easier to transport. 

As a standard feature, the 21LC650 model offers the double trolley system with automatic changeover (called DT in the data sheets), and incorporates, as a novelty, the optional availability of single trolley (ST) which simplifies maintenance work while increasing load capacity in short boom lengths.

The height, which is self-supporting with a built-in base, can reach up to 279.5 ft. Also, the tower sections are 8.2 square feet.

In addition, a new climbing cage is presented: J3A-11, which follows the concept of the J3-20, with greater length and distance between rollers, a saving in scale recovery time, thanks to the auxiliary hoist included, which can also be transported in standard containers or trucks.

With regard to the lift engines, the standard for the 44,900 lb version is 50 kW, while for the 55,120 lb version it is 65 kW. The 110-kW engine is optional for both versions, with a speed of up to 290 m/min and maximum capacities of 5150.9 ft of cable.

Furthermore, the 21LC650 flat-top tower crane comes as standard with the CUBE cab in its L version, with the XL available as an option.

Technical features

  Maximum load Reach Jib-end load Technical
data sheet
Normal PowerLift
21LC650 20t 44,900 lb 262.5 ft 9,920 lb 10,910 lb
21LC650 25t 55,120 lb 262.5 ft 9,040 lb 9,940 lb [doc5]
21LC650 37´5t 82,670 lb 262.5 ft 9,040 lb 9,940 lb

CONTACT

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
I have read and accept the data protection policy *
BASIC DATA PROTECTION INFORMATION
Controller Linden Comansa, S.L. +info
Purpose Respond to your request for information. +info
Rights You have a right to access, rectify and delete data, as well as other rights, as explained in the additional information. +info
Additional Information You can consult additional and detailed Data Protection information here.

We use our own and third-party cookies to analyze our services and show you advertising related to your preferences based on a profile prepared from your browsing habits (for example, pages visited or videos viewed). You can get more information and configure your preferences.